EI-H1000XYZ Fully Auto Micro Digital Micro hardness tester integrated with optical projection, mechanic shift, electric control, digital projection, image analysis, and computer process etc. kinds of latest professional technique, it can control the Vickers hardness tester and auto stage by host, and indicate the indentation on the screen by digitization, then test the micro hardness of metal parts of non-metal material, kinds of film, plating, harden depth, coating thickness, film thickness, and the distance between two points by automatic reading, manual reading; meanwhile, it can take the picture of surface appearance of metal, and print in fixed ratio. This system breaks through the traditional test method, complete the full automatic, high accuracy, high repeatability test; it is the important equipment for analysis material.
Technical specifications
A.Computer host
Branded
B.Operation system suitable
WINDOWS
C.Digit imaging system
High resolution:1.3 million pixel(1280x1024)
High speed capture:1280x1024 resolution:25 frame/s;640x512 resolution:79 frame/s;
High definition:monochrome picture, better definition;
Target surface:1/2 inch
D.X-Y auto stage
Table size:More than 110x110 mm
Maximum movement:25X25 mm
Minimum pace:less than 1μm
Movement speed:adjustable;
Control mode:Manual, electric, computer control;
E.X-Y stage computer control mode
Fixed position movement, fixed point movement, directional movement, setting track movement and so on various movements, which can be saved, and adjusted
F.Test mode
Semi-automatic——auto stage + manual focus + auto reading
Manual mode 1——auto loading + manual measurement of objective
Manual mode 2——manual stage + manual focus + manual focus + auto/manual measurement
G.Auto/manual reading
Time of auto reading:it is about 300 ms for single indentation;
Auto measurement accuracy:0.1μm;
Auto measurement repeatability:±0.8% (700HV/500gf,imaging in good definition)
Manual reading:manual click acquirement,auto researching point,4 peaks measurement,2 diagonals measurement
